Stratasys F900 3D Production System
The Stratasys F900 3D Production System builds durable, accurate, repeatable parts as large as 914 x 610 x 914 mm (36 x 24 x 36 in.). With the availability of fourteen material options, it’s suitable for building fixtures, factory tooling and end-use parts, as well as the most demanding 3D prototyping. For uninterrupted production, the system is equipped with two material bays.
Materials include high-performance thermoplastics for biocompatibility, static dissipation and resistance to heat and chemicals. With three layer thicknesses to choose from, you can strike just the right balance between fine feature detail and FDM’s fastest build. F900 throughput is more than twice that of the Fortus 250mc.
F900 Products Specs
FDM Nylon 12
ULTEM 9085 resin
ULTEM 1010 resin
FDM Nylon 6
FDM Nylon 12CF
914 x 610 x 914 mm (36 x 24 x 36 in.)
Two bays each for material and support canisters
0.127 mm (0.005 in.)
0.508 mm (0.020 in.)
0.330 mm (0.013 in.)
0.254 mm (0.010 in.)
0.178 mm (0.007 in.)
Soluble for most materials; break-away for PC-ISO, ULTEM and PPSF; soluble or break-away for PC
2772 x 1683 x 2027 mm (109.1 x 66.3 x 79.8 in.)/with crate: 3287 kg (7247 lbs.), without crate: 2869 kg (6325 lbs.)
Parts are produced within an accuracy of ± .09 mm (± .0035 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)
10/100 base T connection; Ethernet protocol
230VAC nominal three-phase service with 5% regulation
230VAC as measured phase-to-phase; 50 Hz or 60Hz; 40 Amp circuit
Special facility requirements:
Insight software will prepare your CAD program’s STL output for 3D manufacturing on a Fortus machine by automatically slicing and generating support structures and paths for material extrusion. For enhanced control, users can manually edit parameters that determine the looks, strength and precision of parts as well as the speed and material use of the FDM process.
With Insight, you can:
- Optimize the orientation of the build for maximum strength and smoothest surface finish
- Customize supports for fast, easy removal and best use of materials
- Program pauses into the build for any reason, such as to embed hardware viz sensors, RFID, magnets, circuitry etc.
- Manipulate tool paths for advanced control over part properties
Bundled with Insight is Control Center. Insight’s sophisticated software application communicates with user workstations and Fortus systems, to manage jobs and monitor production status. Design, engineering and manufacturing teams can network and share 3D manufacturing capacity to maximize efficiency and throughput.